Relearn new TPMS Chevy Avalanche 2011 with EL-50448

How to use EL-50448 make new TMPS on cars?here is a example of make new TPMS for 2011 Chevy Avalanche using EL-50448

Tool:EL-50448 TPMS reset tool

Car model:2011 Chevy Avalanche

Follow step guide :
Tire PSI won’t show the value on dashboard, because car TPMS system will not automatically recognize after change new Sensor.

Set the gearshift lever to "P"

Turn on the ignition

Roll down car window

Press to enter learning mode

Get out of car and close Door, Let’s start with the left front wheel, Hold  EL-50448  close to the valve stem.

Then front-right wheel

Rear-right wheel

Rear-left wheel

Open the door and go inside the car

You will find the Tires PSI are displayed on dashboard

Done!

source:http://www.obdexpress.co.uk/service/how-to-use-el-50448-make-new-tmps-on-cars-13484.html

Xhorse MINI VCI Toyota TIS Techstream program keys for LEXUS RX350 2014

This is how to program a key to LEXUS RX350 2014 with cheap Xhorse MINI VCI TIS Techstream cable.

what you need?

1. Xhorse MINI VCI single cable---€23.99, free shipping 

2. TIS Techstream (running on WinXP): Ver 8.11.006 or higher ( you can download LATEST V10.30.029 from our official blog)

3. An old(registered) key and new keys

Vehicle model and year: Lexus RX350 2014

Precedure:

Insert MINI VCI 16 pin connector into car OBDII port, another side of VCI cable connect with laptop

Insert the registered key and switch ignition on

Then run Techstream and click “Connect to Vehicle”

It will initialize USB communication and connect to vehicle, wait for a little while

Then select required car information and press “Next” to continue

It will come to system selection menu, choose “Body Electrical”, then double click “Smart Access”

Select “Utility” option, then double click “Smart Code Registration”

Techstream will show you this introduction, Press “Next” after all check boxes are checked

Preparation before work, you need a registered key and new keys (to be registered)

Then press “Next”

Click “Pre-Start CHK” to review registration process, close the pop-out interface then click “Start” button to begin registration

Touch ENG SW button with a registered key

The old key is moved out of the vehicle, touch ENG SW with a new key(Metal part), and the new key(remote key part) is then placed in the right seat area.

Finally, the key code registration is complete

Done! MINI VCI cable + Techstream program key for LEXUS RX350 successfully! Try to enjoy the new key.

Original :http://blog.obdexpress.co.uk/2016/12/28/program-lexus-rx350-2014-remote-key-with-techstream/

OBDSTAR F101

Four top reason to recommend obdstar f101

1. OBDSTAR F101 is appropriated for remote, programming Car Keys and smart key of TOYOTA vehicles.
2. It’s easy to carry,and its appearance is designed elaborately.
3. The main unit system adopts ARM high speed chip to keep it running fast,stable and anti-jamming.
4. Upgrade via TF card at any time.

What will OBDSTAR F101 Toyota G  immo reset do ?

1. Support 4D(67,68) chip immobilizer reset(All keys lost).
2. Support 72 chip(WITH G,EUROPE) immobilizer reset(All keys lost).American TOYOTA with G key Reset will upgrade soon!
3. Support smart key reset before 2009(All keys lost).
4. Add/erase Keys for all of TOYOTA cars.
5. Add/erase smart keys for all of TOYOTA cars.
6. Add/erase remotes for most of TOYOTA cars.
7. No need to connect with computer, plug and play, automatic transfer.
8. No need to buy tokens.
9. One Key Upgrade
10. Have good man-machine interaction.

Package Includes:

1pc x   F101 main unit

1pc x   TF Card

http://blog.obdexpress.co.uk/2016/12/26/obdstar-f101/

Best Renault CAN CLIP vs Cheapest CAN CLIP china clone

Has anyone bought a renault can clip diagnostic interface? How much it should be ok? Check Best-quality Renault CAN CLIP china and the Cheapest CAN CLIP clone. And it talks.

How to ensure your Renault CAN CLIP diagnostic interface is the BEST-QUALITY?

 

This is Quality A+++ Can Clip for Renault with the high quality chip CYPRESS AN2135SC or CYPRESS AN2136SC.

The new chip AN2135SC/AN2136SC solved communication issues of other CLIP versions. That make CLIP work more stable and can be used for a longer time

Using other versions of Renault CLIP, the diagnostic interface will disconnect if users have no operation for 10 minutes around after successful communication to the car.

With this new CAN CLIP for Renault, the issue solved, with the chip AN2135SC/AN2136SC. This is the PCB with new design.

 

Source: http://www.obdexpress.co.uk/wholesale/can-clip-renault-diagnostic-tool-interface.html

So that it can works no issues as the original. That is, it’s the BEST-QUALITY Renault CLIP china clone.

Where to buy the CHEAPEST Renault CLIP china clone?

This is the source with the cheapest clip:http://www.obdexpress.co.uk/wholesale/can-clip-diagnostic-tool-renault.html

This is the NEWEST Renault Clip china clone, just released on Dec. 2016. It is only for $105, the CHEAPEST version, compared to others. Work no issues of the basic obdii functions.

So, Renault can clip china clones only differs in PCBs and price. All have been tested without issues on Automatic test of all computers, Physical measurements, OBD diagnostic tests, Airbag test, Antipollution, Multimeter inEnglish/ German/ Brazil/ Denish/ Spanish/ Finnish/ French/ Italian/ Norwegian/ Dutch/ Portuguese/ Romania/Swedish.

Tip 1: Quality & Price

In China, you can get anything – at/for any price, problem is that you will have to accept the quality. “You get what you pay for” – And this is more or less true, there will be always someone somewhere “trying to” do it for less, but there are thresholds and once you step under them, you will have to suffer from the results. Quality of a product also depends on the material you purchase (You can’t simply make gold out of wood)

Tip 2: Reasons for low costs

The only reason why the obdii diagnostic cables are made in China is because 90% of the materials (micro-controllers and ICs) come from there. That is, it’s mainly about cost, most people would not be ready to pay 3-4 times the price just for the device being made in Europe or the US.

So, items are produced in high quantity and cost saving here

Anyway, good luck and enjoy clipping.

source:http://blog.obdexpress.co.uk/2016/12/21/best-renault-can-clip-vs-cheapest-can-clip-china-clone/

(solved) VCM2 clone error “Not Connected to VCM II”

This is a working solution of Ford vcm2 clo

with the error message “Not Connected to VCM II” after successful IDS installation. Try to flash / reset vcm2 to solve the issue of low firmware versions.

Vcm2 connection error:

Working solution from pros work for obdexpress.co.uk:

Find out the reset button on the VCM2 clone unit

Press the reset button for a while

Connect the vcm2 to the laptop via the USB cable

DO NOT use the OBDII cable for the connection to car

Unpress/loosen the button when all lights turn on

The find out Bosch the the start menu

Open ford vcm 2 manager to flash and reset the ford vcm 2 clone

Note: solutions above only works fine with vcm2 at http://www.obdexpress.co.uk/

Good luck and enjoy diagnosis with vcm2!

http://www.obdexpress.co.uk/service/solved-vcm2-clone-error-not-connected-to-vcm-ii-13475.html

Autel MaxiSys MS906TS Wireless TPMS

New AUTEL TMPS TOOL is on sale at obdexress.co.uk:High Quality Original Autel MaxiSys MS906TS Wireless TPMS & Advanced Diagnostics System Free Shipping

Autel MaxiSys MS906TS is the latest addition to the MaxiSys product line of advanced wireless diagnostic devices integrated with the TPMS antenna module. The device is based on the Android operating system featured with the best possible coverage of OE-level diagnostics and TPMS integration.

1.Why buy a secondary TPMS tool?

Autel MS906TS is an all-in-one industry first combining advanced diagnostics with complete TPMS functionality. Now technicians don’t need a second TPMS tool to trigger, relearn, or program Autel MX-Sensors. Quickly test all vehicle systems with one ultra-fast, lightweight, wireless, touch screen tablet with the same vehicle coverage and advanced diagnostics as the MS906.
2.Click to download:Autel MaxiSys MS906TS Wireless TPMS  user manual

3.Autel MS906TS Advantages:
1.Wireless TPMS & Advanced Diagnostics System
Operating on the Android navigation system, the MS906TS provides amazingly fast sensor programming and diagnostic scan functions with its powerful running speed and large 32 GB solid state hard drive. The system also features the latest AutoVIN technology to identify vehicles in one touch as well as its exclusive AutoScan function. These features allow you to easily acquire vehicle information, scan all ECUs and run diagnostics on selected systems.

2.Optional Compatible Accessories

Featuring the best possible coverage of OE-level diagnostics and ECU coding capability, the MS906TS also supports add-ons like an oscilloscope and inspection camera to perform more extensive professional testing.

3.Autel Cloud: By and For the Community

As one of the fastest growing diagnostic companies in the world, Autel’s innovators are determined to extend the boundaries of wireless evolution. Supported by superfast 802.11b/g/n Wi-Fi, big data becomes even more accessible. Autel now integrates real-time big data into the MaxiSys system using cloud-based innovations:

MaxiFix, Autel’s online community of global professional technicians, offers a constantly expanding database which includes industrial professionals from around the world offering thousands of successful Fix & Tips that are shared, discussed and updated every day. This feature brings essential resources to your desktop in real time, granting quick and easy search of diagnostic and repair procedures, tips, and advices.

3.Autel MaxiSys MS906TS Specifications

Operating System	Android™ 4.4.2, KitKat
Processor	Samsung Exynos T5260 6-Core Processor (1.3 GHz quad-core ARM Cortex-A7 + 1.7 GHz dual-core ARM Cortex-A15)
Memory	2 GB RAM & 32 GB ROM
Display	8.0″ LED capacitive touch screen with 1024x768P resolution
Connectivity	Wi-Fi (802.11 b/g/n), USB: 2.0, Mini USB 2.0, Wireless BT V2.1+EDR, Class1, HDMI 1.4a, SD Card (support up to 32 GB)
Camera (rear)	Rear-facing, 8.0 Megapixel, AF with Flashlight
Sensors	Gravity Accelerometer, Ambient Light Sensor (ALS)
Audio Input/Output	Microphone, Single Speaker, 3-Band 3.5 mm stereo/standard headset jack
Power and Battery	10,000 mAh 3.7 V lithium-polymer battery, Charging via 12 V AC/DC power supply
Input Voltage	12 V (9-35 V)
Power Consumption	5 W
Operating Temperature	-10 to 55°C (14 to 131°F)
Storage Temperature	-20 to 70°C (-4 to 158°F)
Housing	Rubberized outer protection and rugged internal housing
Dimensions (W x H x D)	270.8 mm (10.0”) x 176.0 mm (6.9”) x 36.0 mm (1.4”)
Weight	NW: 1.10 kg (2.42 lb.)

 Here is a comparison table of Autel TPMS diagnostic  tools, incl. Autel MaxiTPMS series and MaxiSys MS906TS.

Comparison	MaxiSys MS906TS	Autel TS601	TS501	TS401	MaxiTPMS PAD
TPMS function
Activate TPMS sensors	√	√	√	√	√
Read sensor data	√	√	√	√	√
Program new MX-sensor	√	√	√	√	√
Scan OE sensor ID and copy OE ID into MX-sensor	√	√	√	√	√
Manual input OE ID into MX-sensor	√	√	√	√	√
TPMS status, one page for all the information	√	√	√
program sensor by OBD function	√	√	√
Relearn by OBD function	√	√	√
Relearn procedure guide on the tool	√	√	√	√
Advanced function
OBD read/clear TPMS DTC	√	√	√
Read TPMS ECU information	√	√
Read TPMS live data	√	√
Reset engine light	√	√
Display I/M readiness status	√	√
On-Screen code definitions	√	√	√
Show OBDII live data graphing	√	√
Advanced diagnostic function	√	√
Check Key FOB		√	√
Tool features
Built-in rechargeable li-ion battery	√	√	√	√
Strong housing with protective rubber boot	√	√	√	√
Print TPMS sensor data via PC	√	√	√		√
Internet updatable	WIFI	SD card	SD card	USB	USB
Multilingual support	√	√	√	√	√
Historical test records	√	√	√
Software Update	1 year free	free	free	free	free
Limited one year warranty	√	√	√	√	√