X-PROG V5.70 ECU Programmer Authorizations Test Verify

2016 Latest v5.70 X-PROG box ECU programmer had tested verify and worked well at obd2express.co.uk.

Xprog version:

software: v5.7.0

firmware: v3.9

Item package display:

20pcx  Adapters Set

XPROG-M V5.70 Authorizations:

AUTH-0001 Motorola HC05 family authorization (allows to read/write EEPROM)
AUTH-0002 Motorola HC08 family authorization (allows to read/write EEPROM)
AUTH-0003 Motorola HC11 family authorization (allows to read/write EEPROM)
AUTH-0004 Motorola HC12, 9S12 family authorization (allows to read/write EEPROM and flash memory)
AUTH-0005 Texas Instruments TMS370/TMS374 family authorization (allows to read/write EEPROM)
AUTH-0006 Motorola HC05Bxx and HC05Xxx family bypass security authorization (allows to read/write secured EEPROM and flash memory)
AUTH-0007 ST M35080 authorization. Read/Write/Erase device to delivery state.
AUTH-0008 BMW EWS3 authorization
AUTH-0009 ATMEGA family authorization (allows to read/write EEPROM and flash memory)
AUTH-0010 MB ZGS001 authorization
AUTH-0011 Motorola HC11EA9/E9 bypass security authorization (allows to bypass security bit and read EEPROM and RAM memory)
AUTH-0012 National CR16 authorization (allows to read/write EEPROM memory)
AUTH-0014 ST7, ST10 family authorization (allows to read/write internal flash)
AUTH-0015 MPC5xx authorization (depending on device program automatically detects MPC5xx, M95xxx device type, flash, external flash and configuration memory size)
AUTH-0018 Motorola HC12, HC912, MC9S12, MC9S12X bypass security authorization (allows to read/write secured EEPROM and flash memory)
AUTH-0020 ARM (Micronas, ...) Family authorization (allows to read/write internal flash and external serial EEPROM)
AUTH-0021 ARM (Micronas, ...) Family bypass security authorization (allows to read/write secured and non-secured internal flash and external serial EEPROM, view/change mileage,chassis number (VIN), serial number and PIN code).
AUTH-0023-1 MAC7xxx
AUTH-0023-2 XC23xx
AUTH-0024-1 MC9S12Cxx
AUTH-0024-2 MC9S12XE
AUTH-0024-3 9S12XE SECURITY
AUTH-0024-4 MC9S12HA/HY/P
AUTH-0025-1 MPC/SPC5xxx Authorized 11/4/2014

New function display:

http://www.mileageprogrammer.n.nu/x-prog-v5-70-ecu-programmer

Flyobd2 FVDI2 VAG Commander success and fail

I bought Flyobd FVDI generation 2 for VAG group vehicles. The only improvement they did was on vag group and that improvement did affect other software.  The rest = 0 or bad.

Hmm… Maybe i can also say nothing new on on VAG. it’s v24 also. Only this time it can process info over the Internet and it function same as avdi v24 but does not support JC cluster and cannot read immo data for Audi from 2009 up , and also when trying to get cs for key coding after processing data over internet it shows 00 00 00 00 00 00 00
What i did on VAG vehicles with this Fvdi2 vag commander:

– Brand/Model of car : VW Caravelle– Year of car : 2001
– Feature in relation : transponder programming from dump
– Version of FVDI : Tagkey Tool 6.2
– Result : Error (4pcs. PCF7935 damaged)
Dump recognized good, pin readed correctly. Problem solved programming prepared PCF7935 to VW id44 via OBD.

– Brand/Model of car : Skoda Roomster– Year of car : 2006
– Feature in relation : pin read and key programming
– Version of FVDI : VAG 24.0
– Result : OK

– Brand/Model of car : golf 6 TDI 2012– Feature in relation : with CS (component protection ) , pin read and key programming
– Result : ok
– Brand/Model of car : VW Passat 3C 2.0tdi– Year of car : 2007
– Feature in relation : learning key
– Version of FVDI : OLD 18
– Result :ok

– Brand/Model of car : VAG– Year of car : 1998-2002
– Feature in relation : pin read from EDC15
– Version of FVDI : VAG 24.0
– Result : Error (can’t connected)

– Brand/Model of car : Audi A4– Year of car : 2003
– Feature in relation : pin read and key programming cluster RB4 crypto
– Version of FVDI : VAG 24.0
– Result : ErrorAfter read pin, eeprom content in RB4 faulty. Car don’t recognized original key. Solved by write content saved after first read.

– Brand/Model of car :Seat Leon 1PA

– Year of car : 2011

– Version of FVDI : fvdi 21

– Feature in relation :add new key

– Result : successfully

I would only suggest fly company to focus more on individual software like vag group and deliver like Xhorse VVDI2 than try to do many and only anger and frustrate customers

http://blog.obdexpress.co.uk/2016/11/28/flyobd2-fvdi2-vag-commander-success-and-fail/

Mpps v18 Multi Boot and Tricore Boot

Here are details of MPPSV18 clone has added Multi Boot & Tricore Boot for Marelli ECUs and controllers with the tricore processors. 

Mpps v18 Multi Boot

MPPS V18 module supports advanced functions on Marelli ECU’s.

Read / Write of Micro, Flash and EEprom without using a BDM programmer!
Fiat 6F3 – Full Read / Write Micro, Flash and EEprom over K-line and CAN.
Fiat 6JF – Full Read / Write Micro and EEprom over K-line.
Fiat 8DF – Full Read / Write Micro and EEprom over K-line.
Fiat 8F2 – Full Read / Write Micro and EEprom over K-line and CAN.
Fiat 8F3 – Full Read / Write Micro and EEprom over K-line and CAN.
Fiat 8GM – Full Read / Write Micro and EEprom over CAN.
Fiat 8GS – Full Read / Write Micro and EEprom over CAN.
Fiat 5SF3 – Full Read / Write Flash and EEprom over CAN.
Fiat 5SF3 – Full Read / Write EEprom over K-Line.
Fiat 5SF8 – Full Read / Write Flash and EEprom over K-line and CAN.
Fiat 5SF9 – Full Read / Write Flash and EEprom over CAN.
Fiat ME7.9.10 – Full Read / Write Micro over CAN.
Fiat ME7.6.3 – Full Read / Write Micro over CAN.
Opel 6O2 – Full Read / Write Micro, Flash and EEprom over K-line and CAN.
Opel 6O3 – Full Read / Write Micro, Flash and EEprom over K-line and CAN.
Opel 6JO – Full Read / Write Micro and EEprom over K-line.

MPPS v18 eu clone Tricore Boot
Mpps adds boot mode support for controllers with the tricore processor.
 

Auto detects ECU and processor type. No need to select from list, everything is automatic!
Read/Write of all memories Eeprom, Irom, Xrom (where possible)
Patch function for OBD Flashing of TPROT ECUs (supports only VAG at the moment)
TPROT / DS check feature, for testing if TPROT is active without opening ECU.
Supports Bosch up to TP12
Supports Siemens (current only for ECU’s without password protection),
Support for unlocking of VAG Simos PCR and Simos 8.
Checksum Correction supported for Bosch MEDC17.

Tricore boot configuration:

MPPS infineon tricore boot mode display:

http://careucar.blogworld.at/2016/11/24/multiboot-tricore-boot-for-mpps-v18/

Obdstar Best diagnostic tool OBSTAR X300 DP

OBDSTAR X300 DP full version is include most of the OBDSTAR product features, including f100, f108, f102, vag-pro, x100, x300 pro3.DP can’t read Suzuki, Nissan 20 pin code ,and can’t ajustment the mileage on Toyota via OBD

Software update
One key upgrade ;

Free update for one year

Language
English, simplified Chinese, traditional Chinese, language customization.
Vehicle coverage:

BAIC

BENZ

BESTURN

BMW

BRILLIANE

BYD

CHANGAN

CHANGHE

CHERY

CHRYSLER(CHRYSLER/DODGE/JEEP)

DFFENGSHEN

DFPV

FAW

FIAT

FORD/LINCOLN

GEELY/HUAPU/SQYL

GM(BUICK/CADILLAC/CHEVROLET/GMC/HUMMER)

GREATWALL

HAFEI

HAWTAI

HIMIKO

HNMAZDA

HONDA/ACURA

HONGQI

HYUNDAI

ISUZU

JAC

JAGUAR

KIA

LANDROVER

LIEBAO

LIFAN

LUFENG

LUXGEN

MASERATI

MAZDA

MITSUBISHI

NISSAN/INFINITI

OPEL

PEUGEOT/CITROEN

PORSCHE

PROTON

QQROS

RENAULT

ROEWE/MG

SGMW

SMART

SSANGYONG

SUBARU

SUZUKI

TJFAW

TOYOTA/LEXUS

VW/AUDI/SKODA/SEAT

YOUNGLOTUS

ZZMAZDA

ZZNISSAN

ZOTYE
Note: There would be some difference to software in different countries. If need more specific information, pls feel free to contact us or our distributors in your area.

X300 DP Features
Read and clear fault codes;
Clear key memory;
Program keys, proximity keys, smart key, flip keys;
Program after-market and OEM keys;
Display live data;
Component actuation;
Read keys from immobilizer memory
New ECU programming;
New mechanical key number programming;
Vehicle identification key programming;
Reset ECU& Reset immobilizer;
New remote controller programming;
Immo PINCODE reader;
Mileage adjustment via OBD;
With full and strong database for the most important vehicle makes;
VCI diagnose
One key upgrade via wifi
Remote assistance
Built-in repair video
Report center
EEPROM chip read and immobilizer initialization;
EPB(Electric park brake);
Oil/Service reset;
Battery matching;
ABS
TPS
SRS reset
TPMS(low tire)reset
Steering angle reset
CVT learning/Value reset
EEPROM/PIC adapter
OBDII
Diagnosis

X300 DP configuration
Standard package: Immobilizer+ odometer adjustment+ EEPROM/PIC adapter +OBDII
Full package: Immobilizer+ odometer adjustment+ EEPROM/PIC adapter+ OBDII+ ABS+ TPS+ SRS reset+ TPMS(low tire)reset+ Steering angle reset+ CVT learning/Value reset+ EPB+ Oil/service reset+ Battery matching+ Diagnosis(Japanese and Korean serials)

Top 7 reasons to choose X300DP:

1. Powerful Samsung Cortex A9 dual-core processor
2. 7-inch capacitive touch screen(1280*800) & backit and multi-point LED
3. 2G RAM and 16G ROM(memory can be extended)
4.7000MA lithium-ion battery & 10-hour battery life
5.Unique ergonomic design and tri-proof case with high security
6. Cover all functions of X100,X200,X300PRO and VAG-PRO 7. Add diagnostic function of whole-vehicle system
7.One key upgrading, long-distance diagnosis, more convenient after-sales service…..

SOURCE:http://www.obd2express.co.uk/wholesale/obdstar-x300-dp-android-tablet-full-package.html

Rosfar red clone CAS3/912X/9S12X IN CIRCUIT PROGRAMMER

,CAS3/912X/9S12X IN CIRCUIT PROGRAMMER is  known as the Rosfar red clone,The quality of the red one is the best. This is better than the blue one.

CAS3/912X/9S12X IN CIRCUIT PROGRAMMER is kind of Mileage Correction Tools for BMW Cars. This Odometer Reset Tool doesn't need remove the micro from the board, only connect 7 pins will be OK.

1.Character

1)No need to remove the micro from the board! You only connect 7 pins will be ok.
2)Works with Motorola/Freescale's HC12, HCS12, HCS12X SECURED MICROCONTROLLERS!
3)Connect PC via USB

2.Supported MCU

MC912D60 MC912DX128 MC9S12DX64 MC9S12DX128 MC9S12DX256 MC9S12XDX512

3.Suppor Vehicle List

BMW 1,3,5,6 Series CAS2 White (MC9S12)
BMW 1,3,5,6,X5 Series CAS3 Black (MC9S12)
BMW 1,3,5,6,X5 Series CAS3 Black (MC9S12X)
BMW 7 Series CAS 2002 (HC12)
BMW 7 Series CAS 2005 (9S12)
BMW X3/X5 EWS4 (MC9S12)
Ford Mustang 2007 (MC9S12)
Landrover Freelander 2002 (HC12)
Landrover Freelander 2004 (HC12)
Volkswagen Crafter EZS (MC9S12)
Mercedes A-Class 2004 Key Module (MC9S12)
Mercedes C/CLK C209 ZGW (MC9S12)
Mercedes E/C W211 Key Module (HC12)
Mercedes E/C/CLK/SLK W211 Key Module (MC9S12)
Mercedes ML/R W164 Key Module (MC9S12)
Mercedes S/SL EZS R230 (MC9S12)
Mercedes Sprinter EZS (MC9S12)
Mini One/Cooper Dashboard (HC12)
Mini One/Cooper EWS4 (MC9S12)
Mini One/Cooper CAS3 Black (MC9S12X)

picture display

source:

http://www.mileageprogrammer.com/bmw-mileage-correction-programmer-for-cas3912x9s12x/

ETKA Electronic V7.5 installation instruction video

(solved) Vocom + Tech Tool view DTCs of MACK truck

This is customer feedback about how to solve Vocom + Tech Tool view DTCs of MACK truck Not compatible.

I’m have a MACK to read faults, but unluckily I failed to diagnose (view DTC’s) or use any off the other features of my Tech Tool 2.04.87. PTT says the software is incompatible and that version on the control unit(s) is not supported by Tech Tool.

Here is my version info:

Product: Tech Tool
Version: 2.04.87
Database: Standard

Last updated: APCI (-A) 11/8/2016 12:19:36 PM
Last updated: APCI+ (-A) 9/14/2016 1:56:29 PM

Every time I go to view DTC’s I get these errors :
it says: the version of software installed in the engine and vehicle electronic control units are incompatible. Electrical faults will present in one or both modules. Upgrade the software in one or both modules to correct the problem.

then i Click OK and get this one:

Software on the control unit(s) below is not supported by Tech Tool.

Please update Tech Tool and try again.

144 144

Then ask obdexpress for help.. solved my issue

I am advised to update the firmware of 88890300 Vocom Interface. Just follow the screen message to do that. Then tech tool works like a charm.
This article is from :http://blog.obdexpress.co.uk/2016/11/15/vocom-tech-tool-view-dtcs-of-mack-truck/

Why to buy VVDI2 and Condor key cutting machine together?

Usually, Xhorse VVDI2 key programmer can work great alone. But in some situations, vvdi2 functions are limited because of Condor key cutting machine (Condor xc-007, iKeycutter condor mini, condor xc-002, etc.)

"The following functions need Internet support and require authorize for CONDOR Automatic Key Cutting Machine:

OBD read MED17/EDC17 PIN/CS/MAC,

Calculate OBD data online,

Calculate EEPROM/FLASH for PIN/MAC/CS"
Other ECU's work good.

Reference:

Xhorse VVDI2:

http://www.obdexpress.co.uk/wholesale/xhorse-pro-vvdi-2-ii-key-programmer.html

VVDI2 = VVDI options + BMW Multi Tool options + Porsche options + J2534(free) + Tango(free) + Remote control generation(free)…..more other function

VVDI2 BMW:

http://www.xhorseshop.com/wholesale/vvdi2-with-basic-bmw-and-obd-functions.html

http://www.obdexpress.co.uk/upload/service/xhorse-vvdi2-vvdi-2-bmw-user-manual.pdf

VVDI2 manual:

http://www.obdexpress.co.uk/upload/pro/xhorse-vvdi-2-software-installation-ser-manual.pdf

This article is from :http://blog.obdexpress.co.uk/2016/11/11/condor-key-cutting-machine-internet-for-vvdi2/

Intelligent Power Supply UD-12V2700 Automotive Programming Dedicated Power

 UD-12V2700  details 


Function:
1. Can Automatically detect and fix according to the health status of the battery.
2. Can charge the battery inside and outside the car, as well as battery repairing.
3. Can repair kinds of batteries, such as ordinary lead-acid batteries, AGM, GEL, VRLA, and others when charging.
4. Automatic Detection Mode, Charging Mode, Exhibit mode, Programming Mode, Battery Repairing Mode.
5. Constant current charging can be any character set.
6. Intelligent programming charging power supply for energy-saving and environment-friendly, yellow-green-screen backlit digital LCD display, is the latest one with automatic detection, automatic charging, automatic maintenance and smart programming as well as other advanced new charger.
7. Multiple protection and self protection. Power off alarm, heat alarm, overload, overheating, overcharging, short circuit, reverse polarity protection function.
8. Auto battery repairing functions, can detect different types of battery charging rehabilitation, apply to automobile service stations, 4S shop and maintenance workshop of advanced charging equipment.
9. Can be used for static state of the vehicle maintenance, testing and electric control system used during programming set code. Preventing them from car damage and data loss during programming or other tests because of the low power.
10. No spark, applies to all special charging curve of battery technology, in full compliance with vehicle electronic systems and air bag requirements.

Attention

Please read this manual carefully before using the product.
Combustible gas will be produced when charging, fire is strictly prohibited at the operating site.
Be careful of the corrosion when it is rainy, snowy or wet. Positive and negative of charge clip cannot be reversed.
Vibration and impact should be avoided, do not charge the frozen battery.

Instruction:

You must use the standard fuse.
Keep the charger clean and check the initial voltage before using it.
Battery charge rules:
Current charging depends on the charge value from the rechargeable battery.

Charging Time:

Depends on the battery type, typically calculated according to the following formula:
Ah/=< battery charging current charging time >
In addition, since the continuation of the charging time, the charging current decreases,
so the entire charging process than the numerical extension of the formula 1/4.
This Intelligent Power Supply can charge one or more batteries meantime, but the charging time will be extended accordingly.
When charging the vehicle battery, remove the original battery clamps.

Steps to use this Intelligent Power supply Charger：

1、Connect the battery and charger.
2、Choose the right mode according the actual situation of the battery and the table below, noted, if the mode outside vehicle is chosen, make sure the
      battery is out of  the car. After finishing this step, press start and the consequential charging will be active.
3、If you connect the battery correctly and it shows poor contact, just press the right button and handle according the tips,
        enable the Mode Enforce Charging.
4、In the programming mode, the voltage cannot be adjusted in Mode 2, and it can be adjusted in Mode 1.
      Press the Right and Down Button at the same time and you can adjust the voltage using the Up and Down Button after hearing “Beep”
      Then press Right and Down Button again to exit the adjust mode. Press start to begin charging.

Specification

Item	Unit	UD-12V2700
Input  Voltage	V	220-240V
Rate	Hz	50/60
Input Power	W	1600W
MAX	RMS	100A
Charging Voltag	v	12
Programming mode	PG VA	2~30V/2~150A
MAH	Ah	10-1200
Dimension	cm	38X32X12
Weight	Kg	9.5

1、Right / Left
2、Up / Down
3、Switch
4、Monitor
5、Over Charge Protection   
6、Over Heat Protection
7、Low Voltage Protection
8、Short Circuit Protection
9、Revert Polarity Protection
source:http://www.obdexpress.co.uk/wholesale/intelligent-programming-charge-power-supply.html