FGTech V54 read & write LUCAS 1708 to 2005

Clone FGTech V53 and V54 FGTech reads and writes LUCAS 1708 to 2005 by the OBD2 cable + mini adapter + adapter VOLVO 8pin (FH12).

8-pin adapter pinouts:

4 & 5 —- GND

16 ——– Vbatt

2 & 13 — CAN hi

10 & 12 — CAN low

Fgtech v54 OBD cable pinouts:

4 & 5 —- GND

16 ——– Vbatt

9 ———- CAN hi

8 ———- CAN low
Up 2006 years (FH”13″) EMS2 by BDM only, because read only part of the data.
EUR 5 it’s EMS2.2 with MCP5554 … It does not support large memory MCP5554 by J-tag.

Good Luck!

(BIG THANKS to the contributor @coralgol1976 in the MH community;

obd2express holds no responsibility of what you try)

Related Reading：FGTECH ECU test success and fail list 

Source:http://www.obdexpress.co.uk/service/how-to-use-fgtech-v54-read-and-write-lucas-1708-to-2005-14499.html

www.autelsale.com

How to convert MPPS V13 to MPPS V16 V18

For those who use MPPS v13
it is possible to have MPPS V16 features in your v13.

Only what you need – just copy folders CHECK,DATABASE,DRIVES into your MPPS directory.
DEVICE DRIVER folder – that is the driver for mpps v16 cable.
Link: https://yadi.sk/d/KbsAkzR_33DRMe

password : abdo0099mhh(BIG THANKS to abdo0099)

I have not tried this yet but hoping that someone has more time than I got… So you may take a risk to try it.

And for your own security , rename your old folders – in a case something go wrong.
You should get newest ECU checksums and drivers .

But, if you don’t wanna be risky to do something with mpps software, it should be a good choice to spend some dollars on crack mpps china clone or eu clone:

MPPS v16 clone: $24 (€23.99)

MPPS V18 china clone: $96 (€94)

http://blog.obdexpress.co.uk/2017/01/05/convert-mpps-v13-to-mpps-v16-v18/

Can KTM100 fw v7.003 read write edc17c64 VAG?

 I was tested KTM100 fw v7.003 clone no reworked read write edc17c64 VAG with no problem.Loaded remap in octavia 3 rs. ktm100 (SE87-D) from obdexpress.co.uk cost €345.00 free shipping

http://www.obdexpress.co.uk/wholesale/ktm100-ktag-k-tag-firmware-ecu-new-programming-tool-master.html

New genius ecu chip tool Customer feedback

Here is the New feedback of genius ECU chip tool from obdexpress customer.

Tested on :
2014 Ford Fiesta Ecoboost 1.0 125hp auto
-> Read ok
-> Write ok
2013 Mitsubishi ASX/Outlander Sport 2.0 4B11 CVT
-> Read ok
-> Write ok
2014 Chevrolet Orlando 1.8 Petrol Auto
-> Read ok
-> Write ok
2015 Mitsubishi Montero Sport/Pajero Sport 2.5DiD 178hp auto
-> Read ok
-> Write ok
tested on tricore edc17c10 all ok


EDC17C64 ID & WRITE ok (1.6TDI)
MED17.5.5 ID & READ & WRITE ok
ME7.5 ID & READ & WRITE ok
MED17.5.21 ID & WRITE ok
Sagem 3000 ID & READ & WRITE ok
Opel ME7.6.2 ID & READ & WRITE ok
Mercedes EDC16C2 ID & READ & WRITE ok
Simos 12 & 18 ID & WRITE ok
Checksum recalculated with Genuine Race Evo software for all of my tunes.

http://www.obdexpress.co.uk/wholesale/genius-flash-point-obdii-boot-ecu-hand-held-chip-tuning.html

What is the difference for all KESS V2 series

OBDexpress.co.uk is selling a series of kess v2,they have own special features, how to choose the best for your car, what is the difference for all KESS V2 series,Look at the following table:

More information:http://www.obdexpress.co.uk/producttags/kess-v2.html