KTAG ECU Programming tool Using Tips

This post will answer all of following questions on Ktag master ECU programming tool including optional version, compatible vehicles, workable software, the difference among all available KTAG, tokens reset method and Ktag FAQ etc.

Ktag master ECU programming tool optional version
Following optional KTAG is compatible with most world-wide cars, and a little part of Motorcycle, truck, tractors and bikes. They are different in hardware version, price and the way to reset tokens.

Ktag ECU programming tool :
Item NO. SE80: FW V5.001, €74.99+shipping

Item NO. SE80-B: FW V6.007, €165.00+ shipping

Item No. SE80-C: FW V6.007, €119.00 free shipping

Item No. SE80-E: FW V5.001,€63.80+shipping

Item No. SE80-D: FW V7.003,€349.00+shipping

Tip on Ktag master ECU programming tool workable software:
So far, the compatible software version is as high as V2.11, if you run the higher software version on the hardware, you will find in the menu many gray icon and the function is not working, since higher software version requires higher hardware version.

Difference between SE80-B and SE80-C, they are same hardware version:
The distinct difference between Item No. SE80-B and SE80-C is that they use different method to reset tokens.

SE80-B token reset method: just press the “Token Reset” Button built-in on the side of machine, and meanwhile plug the power adapter to the power. You are free to get as much tokens as you can.

SE80-C token reset method:After tokens use up, connect the USB to the computer, use the token reset tool to write, then you can reset the tokens,

Note: Ktag is built in 30 tokens, after use up, you need to reset. The machine without tokens are built in 500 tokens which guaranty you can use Ktag for a long time.

KTM100 and KTAG have the same function, hardware version is V7.003,software version is V2.13.

KTM100 should pay attention:
A.K TM100 must not can use the original software, use original software might damage the equipment.
B.K TM100 buttons are all grey, there are two possible. A is a customer with the original software upgrades, and second, the TOKEN is used up.

KTM100 get TOKEN method:
Through the TOKEN RESET BUTTON to restore.

Must pay attention to is to hold down the button and turn on the power then you can reset TOKEN, just hold down the button is not used, and only two to do at the same time then you can reset token.

FAQ:
1.Q:If Ktag will burn the ECU?
A: No, even you wire the cable not correctly. By the way, if you use FGtech and wire the cable for incorrectly, it will easily burn the ECU.

2.Q:When Ktag deducts tokens?
A:1)Back up: when you back up the data, it will not deduct tokens.
    2)Flash (map) tunning file: It will not deduct tokens when read but will deduct when write.
    3)EEPROM: It will not deduct tokens when read but will deduct when write.

3.Q:If you can able the internet connection when using KTAG?
A:No, you are required to disconnect the network connection, otherwise Ktag may automatically connect the network connection to upgrade and damage the machine, or you get all the menu options gray and not working.

More information:http://www.obdexpress.co.uk/producttags/k-tag.html

Notes for K-TAG(KTAG) ECU programmer

K-TAG is an ECU programmer which has released to the version V2.06. It specializes in BDM function. What should be noted when using the K-tag programmer? Following notes are helpful for owners.

NOTE1
Apart from some common protocols, KTAG ECU programmer also supports BDM MOTOROLA MPC5xx protocol.

NOTE2
K-TAG and KESS V2 share the same software but they are two different product. KESS V2 is able to do OBD function while KTAG can not.

NOTE3
If you find out that K-tag can only read from the slave files but not write. Make sure refer to the ECU programming list instruction. Some ECU can be read but not write, like EDC16 Audi.  Others can only be written but not read vice versa.

NOTE4
Tokens are needed when KTAG does ECU programming function. K-TAG programmer comes with 500 tokens. You can buy J-link ARM CPU repair chip to reprogram to get another 500 tokens after use them up.

NOTE5
KTAG comes with AC adapter in the package. You do not need to buy them separately.

NOTE6
Never update K-TAG programmer, otherwise will damage the tool.

NOTE7
Incorrect installation will lead to the error: "Communication error: please check power and connections" (as the picture below), here is the tutorial guide for installation K-TAG software.


http://www.dailymotion.com/video/xum8h5_how-to-use-ktag-k-tag-ecu-programming-tool_auto