How to make MPPS V16 work?

Recently I have got myself the MPPS V16 ECU programmer tool to play with. As it turned out, with right installation it is possible, contrary to the popular belief, to get it working with as many car as possible. So, I decided to share the instructions, which hopefully is helpful to someone.

Equipment:

MPPS V16 ECU Chip Tuning for EDC15 EDC16 EDC17. I bought mine from OBD365 79USD. The tool was shipped by DHL, arrived 10 days after I ordered it. It came with a 16 pin connector, and a mini CD with drivers and software. Mine was advertised as "Newest version for EDC15 EDC16 EDC17 inkl CHECKSUM". The "newest" refers to the version of bundled software rather than the firmware.
A laptop running Windows XP sp2. If you do not have Windows XP, you can ask the seller for the software. The tool can only work on XP system.
The content of bundled CD:

The MPPS V16 software can also be found on the internet as well:

Installation steps:

Step 1: Plug the 16pin connector into cars OBD port, which usually locates under dashboard on the drivers side, and connect its USB cable to the laptop.

Step 2: Put MPPS V16 CD into your computer, and open the new disk.

Step 3: Install MPPS update file.

1) Run MPPS update file

2) Select the language

3) Click "Next" and accept the terms of licensee agreement. Wait a few minutes and let the computer receive system information and install autoupdator.exe.

4) Click "Finish".

Step 4: Copy "loader" in the CD and paste it to the desktop

Step 5: Delete the shortcut "MPPS" on the desktop.

Step 6: Complete the Found New Hardware Wizard

1) Open "Found New Hardware Wizard" window.

2) Follow the instructions.

3) Finish installation of software for "Amt Flash"


Step 7: Make sure MPPS driver is successfully installed

Click "My Computer" – "Manage" – "Device Manager" – "Universal Serial Bus controllers". If you see “Amt Flash”, it means the driver is successfully installed.

Step 8: Open the MPPS application software.

1) Open "loader"

2) Choose from Local Disk (C), open the file folder "MPPS", choose MPPS

3) Select Language, car Make, car Model and ECU type.

4) Click "EDC ID (F1)".

5) Click "Read".

6) Click "Write".

Note on installation:

Disable or close the anti-virus software on the laptop before installing the software. The software is virus-free, but could be damaged by anti-virus software by accident.

Performance:

I have tested the tool on an Audi A3 with 1.0L Bosch ME7.1 K Line and 10 other vehicles with EDC16, EDC17, MED9.x, Siemens PPD1 / x, EDC15 and ME7 chip, all work ok.

Advantage:
After playing more, I find this MPPS V16 is quite user-friendly as it needs no chip soldering, which is very easy to operate to those users who are not familiar with soldering technique. Besides, it is available with more languages than other ECU programmers such as KWP2000 plus.

Note:
It supports Windows XP only. It would be better if it can work on Win7 and Win8.
OBDexpress.co.uk

WIFI ELM327 OBD2 scanner with Rev software APP on iOS 2015

You have to jailbreak your iOS device when buying or downloading some app programs for Bluetooth OBD2 devices.  WI-FI version OBD2 scanner helps to improve the limitation of Bluetooth one.
Equipment:
iOS phone or tablet
WIFI OBD2 elm327 scan tool (WIFI OBD2 EOBD2 scan tool, elm327 wireless auto scanner, V2.1 WIFI elm327 OBD2 diagnostic tool)

Rev software app
1) Download Rev software program in iTune app store
https://itunes.apple.com/us/app/rev/id302420711?mt=8
2) Connect your WIFI OBD2 scan tool with vehicle
3) Choose your elm327 device in your iOS device in the Settings
4) Connect iOS device with WIFI network
5) Set the IP Address to Static. Configure the IP address to 192.168.0.123 and the Subnet Mask to 255.255.255.0.
6) Go back and exit settings.  The scanner will prompt you to configure an IP as a “router”. Select No. Do not set IP as a router. Otherwise, the iPhone will join the internet via elm327 and all data will not come through after connected to vehicle.
7) Start the engine and the WIFI elm327 scan tool will be powered up through vehicle OBD port
8) Configure the connection to use a custom TCP connection with IP 192.168.0.10 and TCP Port 35000 in Rev APP.
9) Enjoys vehicle data information, for example: see more than 5 parameters using landscape, record the data and later export it to CSV, helps maximize driving habits while saving on fuel etc.

OBDexpress.co,uk

V145 Renault CAN Clip torrent Free Download

OBDexpress has newly released V165Renault CAN CLIP diagnostic tool.
V145 Renault CAN Clip Multi-language:
English, German, Brazil, Danish, Spanish, Finnish, French, Italian, Norwegian, Dutch, Portuguese, Romania, Swedish…
Operating system:
- OS: Windows XP
- CPU: Pentium / Athlon 1.8 GHz or higher
- RAM: 256 MB of system memory
- Hard Drive: 5 GB of available space
- DVD-ROM
Renault Can clip Function:
1. See all the information relating to the vehicle
2. Computer test
3. Automatic test of all system computers
4. Reprogramming
5. Airbag test
6. Scan tool (OBD tests)
7. Base Doc (access to Technical Notes)
8. Physical measurements
9. Antipollution
10. Multimeter
Here is the free V145 Renault CAN Clip torrent download link
http://down.obd365.com/can-clip-v145-torrent.zip

How to install V145 Renault CAN Clip diagnostic software on Windows XP:
https://www.youtube.com/watch?v=nZBjESqqvYk
OBD365 has launched two versions Renault CAN Clip diagnostic interfaces: SP19-A and SP19-B. They share the same software and functions. According to our customers’ feedback and sales valium, SP19-A enjoys more popularity and has a better quality. While SP19-B is cheaper than SP19-A.  SP19-B Cheap Renault Can Clip at http://www.obd365.com/wholesale/renault-can-clip-diagnostic-interface.html
Renault can clip crack steps

How to use Tech2 scanner to make Saab 9-3, 9-5 key

As a locksmith, some of my friends often come to me to borrow my car key programmer and program their own key to save money. The other day, a friend borrowed my GM Tech2 scan tool to replace a 2002 SAAB key as his was broken, but do not know how to use it. So I have made a quick guide for him. Hope this may also help anyone who needs it. Before the DIY, please note that this only applies 1999-2002 Saab 9-3 (and 2003 9-3 CV) and the 1998-2009 Saab 9-5. Earlier cars do not require programming as extensive as this, and the 9-3 Sport Sedan/Sport Combi are a different breed altogether.

How to:
An Electronic Key is a key that contains an electronic device called a transponder. Each transponder has a specific code embedded in it. The car must be made aware of the key and its transponder by programming with Tech 2 scan tool.

The 9-5 and Original 9-3 were the first Saabs to use an electronic key. Gone is the ability to simply have your hardware store cut you a spare key, these keys must be electronically programmed to the car that they will be used with. There is a lot of confusion and questioning on the respective boards regarding these keys, how to add more, what to do when you lose them all, etc. Hopefully, this

FAQ will answer all the questions regarding these keys.
When you insert the key into the ignition, the TWICE module (Theft Warning Integrated Central Electronics) energizes a loop of wire surrounding the ignition key. The electromagnetic field generated by this loop (think of a very weak electromagnet) provides power to the transponder. The transponder sends its electronic code, which is read by the same loop, and TWICE then checks to see if the transponder’s code is in the list of “accepted” keys. If it is accepted, TWICE tells Trionic all is well, and Trionic starts the car. The message “KEY NOT ACCEPTED” will appear in the SID if it is not accepted, and the car will not start.

Please note that the key need to be cut although the transponder provides for the electronic unlocking of the car’s engine, the key must still be cut for the lock cylinder to turn the ignition and door locks.
http://blog.obdii365.com