How you can Use a Laptop As an Automotive Scan Tool

Modern automobiles autel tool come equipped with OBD-II (On-board Diagnostics). OBD-II is actually a far more state-of-the-art management system; specialists and home mechanics can connect towards the method by way of the diagnostic port. It is possible to also use a laptop or laptop as opposed to a handheld scanner, even so, you will need a kit. Most laptop diagnostic application is much more sophisticated than handheld scanners, offering the ability to check engine effectiveness, also as read problems codes.
Purchase a laptop OBD-II interface kit. You can acquire these kits at several automotive components stores; furthermore, these are readily available on the net.
Insert the program set up disc. Follow the prompts to finish the installation. If your installation isn't going to immediately get started, accessibility "My Computer" and double-click on the disc to start out.
Connect the parts to your laptop. Most kits include a USB to serial adapter for laptops with no serial ports. After the device is connected to the laptop, connect the OBD-II diagnostic port cable.
Start the autel ds708software system. Double-click to the desktop icon in the event the plan did not immediately commence. Get cozy with all the management interface.
Bring your laptop to your motor vehicle. Turn the ignition important to your "On" position, but usually do not crank the engine. Connect the OBD-II scan cable through the laptop towards the diagnostic port on your car (commonly situated in the driver's side foot properly, below the steering properly).
Click the "Scan" button over the handle interface, if necessary. View the engine codes and diagnostic data supplied by the plan.